KDS 900 OEM Microliter Syringe Pump
The KDS 900 Microliter and KDS 910 Milliliter syringe pump modules are highly precise, they are ideal pumps for OEM applications. Two modes of operation–constant flow rate or volume dispense. Infuse and withdraw limit switches indicate when the syringe has reached the end of travel (infuse switch) or the syringe plunger has been withdrawn to its limit (withdraw switch). If either switch is activated, the pusher block movement is stopped.
Syringe diameter, flow rates, and target volumes are stored in non-volatile memory. Interface to the pump modules is through RS232.
Features:
- Constant Current Drive offers more consistent force delivery over the entire dynamic flow rate range.
- Independent infuse and withdraw limit switches
- Linear Force – Minimum 7 lbs over entire range
- Emergency stop switch at pump
- Start/stop at pump
- Encoder for stall detection
- Power and run LED on the PC Board
- Supports external run LED
- Network up to 16 pumps
- <+/- 0.35% Accuracy
- Pump setting retained in NVRAM
- Adjustable force control
- Easily mounts to panel openings
- Customizable syringe mechanisms available
- Customizable chassis designs available
- Lead Free Design, RoHS compliant
- CE approved
|
Specifications:
Number of Syringes |
|
Syringe Size |
|
Min. Flow Rate |
|
Max. Flow Rate
|
- 10 ml syringe - 1.408 μl/min
|
Linear Force |
|
Advance per Microstep |
- 0.0827 micron (1/16 step)
|
Max. Step Rate |
|
Min. Step Rate |
|
Accuracy |
|
Reproducibility |
|
Dimensions |
- 7.25 x 3.63 x 4.5 in (18.41 x 9.2 x 11.43 cm)
|
Weight |
|
|
