Features and Benefits:

This system is based upon the heating and cooling technology used in the LTS420 stage, with similar temperature control and range, the dynamic heating and cooling performance ensures that most electrical component temperature control applications are covered.The system comes as a simple turn key solution easily operated with little or no experience with temperature controlled stages.

Up to 8 positional gold tipped, tungsten probes (other types can be used) can be connected to electrical connectors within the sample chamber and enable the user to make electrical measurements on the sample, while accurately controlling the temperature inside a gas tight environment. Gas ports on the sides of the stage enable the user to purge the sample environment with inert or humidified gas.

The stage consists of a large area (58x43mm) temperature controlled element with a platinum resistor sensor embedded close to the surface for accurate temperature measurements. The sample is simply placed on the heating element and the probes moved manually to make contact at the appropriate points.

The new T95-LinkPad temperature controller with LCD touch screen control is used to quickly program a temperature profile by simply tapping the onscreen controls.

To cool below ambient a liquid nitrogen cooling pump is required. The LNP95 pump is extremely efficient with liquid nitrogen so that the 2L dewar supplied is enough for at least half a day of experiments. Dewar and all tubing are supplied with the system.

There are stage clamps available to attach the stage to the substage of the microscope or use the Linkam Imaging station to ensure even greater sample access and free up your research microscope for other microscope based applications where the Analysa Probe stage is not required.