- Holds 1 Syringe up to 60 cc*
- Infusion rates from 1.459 µL/hr ( 1 cc syringe) to 7635 ml/hr (60 cc syringe)
- Easy-to-use keypad interface
- Space Saving Chassis: Foot print size of only 5 3/4" x 8 3/4"
Won't take up unnecessary space on your laboratory or production bench
- Includes all advanced functions and programming features of the NE-1000 family
|
- Fully programmable; automation capable
- Operates stand-alone or from a computer
- Infusion and withdrawal
- Set a single pumping rate and/or dispensing volume
- Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer
- Network, control, and monitor up to 100 pumps with one computer
- Worldwide power supplies available
- Motor stall detection
- Dispensing accuracy of +/-1%
- Unlimited lifetime technical support
- Two year warranty
|
Example Flow Rates (NE-1010): |
| Syringe Size
(cc) |
Maximum
Rate (mL/hr) |
Minimum Rate (µL/hr) |
| 0.5 µL |
91.83 |
0.001 |
| 1 mL |
191.2 |
1.459 |
| 3 |
693.4 |
5.291 |
| 5 |
1462 |
11.17 |
| 10 |
2160 |
16.49 |
| 20 |
3514 |
26.82 |
| 30 |
4619 |
35.25 |
| 60 |
7635 |
58.26 |
| Sample syringe configurations, can hold any size syringes below 60 cc. |
|
Maximum syringe size:
Although a maximum of a 60 cc syringe is specified, the pump can hold
up to a 140 cc syringe but can only open up to about 120 cc lengthwise
High pressure notes: The NE-1000 produces about 15 lbs of linear force at top speed
and about 35 lbs at slow speeds. 10 ml/hr is an example of
slow speed. The pressure that can be generated is relative
to the syringe size. On a 60 ml syringe, this would roughly
produce about 30 psi
The high pressure version, NE-1010, will approximately double the pumping
force at the same speeds. |
