NE 500 Application Syringe Pump

• Does not have a built-in user interface
• Chassis mountable: 9 1/2"L x 4 1/4"W x 4 1/8"H (23.5 x 10.8 x 10.5 cm)
• Operates from a 12V DC power source
• Holds 1 syringe up to 60 cc
• Infusion rates from 0.73 µL/hr ( 1 cc syringe) to 2100 ml/hr (60 cc syringe)
• Includes all advanced functions and programming features of the NE-1000 family
• Custom modifications to the mechanics and firmware are available

• Built for Automation
• Computer controllable: net workable up to 100 pumps
• Stand-alone operation: pre-program the pump with a dispensing program, then operate the pump from an attached Foot Switch, button, or I/O controller
• Add the OEM Starter Kit to run as a fully functional, stand-alone pump
• Infusion and withdrawal
• Set a single pumping rate and/or dispensing volume
• Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer
• Network, control, and monitor up to 100 pumps with one computer
• Motor stall detection available in NE-501 model
• Dispensing accuracy of ± 1%
• Unlimited lifetime technical support
• Two year warranty

High pressure notes:

The NE-500 produces about 15 lbs of linear force at top speed and about 35 lbs at slow speeds. 10 ml/hr is an example of slow speed. The pressure that can be generated is relative to the syringe size. On a 60 ml syringe, this would roughly produce about 30 psi

The high pressure version, NE-510, will approximately double the pumping force at the same speeds.

NE-501 OEM Syringe Pump with Stall Detection

Model:NE-500L

The NE-500L includes an extra long chassis on the NE-500 that will hold and allow a 140 ml syringe to open to its full length.

 

Model:NE-501

The NE-501 includes an optical encoder on the NE-500 that will detect and stop the motor during a stall. Typically used in high pressure applications where there is a risk of exceeding the maximum force specified. Without the optical encoder, the pump will continue to cog the event of a stall.

NE-510 High Pressure Variant

Model:NE-501L

The NE-501L includes an extra long chassis on the NE-500 that will hold and allow a 140 ml syringe to open to its full length with stall detection.

Model:NE-510

The NE 510 offers double the pumping force of the NE 500 at the same speed.

Example Flow Rates (NE-510):
Syringe Size (cc)	Maximum Rate (mL/hr)	Minimum Rate (µL/hr)
0.5 µL	91.83	0.001
1 mL	191.2	1.459
3	693.4	5.291
5	1462	11.17
10	2160	16.49
20	3514	26.82
30	4619	35.25
60	7635	58.26

Model: FW-5-X

Extra Features: X upgrade is Linear/Gradient flow rate ramping, additional advanced programming possibilities, and additional i/o functions, expansion port, attach external switches, sub program selection structure, speed control switch.

 

Model: FW-5-X2

Extra Features: X2 upgrade includes all features of the X model plus increases the number of programmable phases from 41 to 340, and increases the max RS-232 baud rate to 38,400.

Description:

Description:

Power supply and secondary cable only. For use when networking two or more OEM NE-500 syringe pumps together. Must use the secondary cable in order to complete this application.

Description: