| |
Overview |
- Heater pad measures 75 mm x 75 mm
- Each syringe heater Control-Unit uses only the Primary-Heating-Pad to sense temperature. All Secondary-Heater-Pads connected to that Control-Unit function according to temperature at the Primary-Heater-Pad. For different temperatures or variable environments, use separate Control-Unites with Primary-Heater-Pads.
- Plugging more than 16 Syringe-Heater-Pads onto one Controller is not recommended
|
| |
|
|
| |
| Syringe-Heater-Kit |
|
SYRINGE-HEATING-PAD2-KIT |
- Heating device for syringes that require temperature-controlled dispensing
- Heats syringe to over 100 degrees Celsius
- Digitally set the heater setpoint
- Temperature sensor in heating pad
- Setpoint retained in memory
- Controller will heat the syringe and hold the set temperature using an on/off or PID control algorithm
- Multiple syringe heater pads can be attached to the control unit
- Heated syringe can be mounted on a syringe pump
- Syringe Heater Kit includes Control-Unit power cable and Primary-Syringe-Heater-Pad
|
|
-
For attaching a second heating pad to SYRINGE-HEATER-KIT
-
Includes a Y-adapter to connect to primary heating pad
-
Temperature sensed in primary heating pad only
|
| SYRINGE-HEATING-PAD3+ |
|
|
-
For adding third, up to sixteen, heating pads
-
Y-adapter not needed to attach third, and up, heating pads to Control-Unit
-
Temperature sensed in primary heating pad only
|
|
|
| |
|
|
| |
***Not for clinical use on humans*** |
| <<< Go Back |
